EDGE 540 V3 67IN BLUE/BLACK/WHITE (14)

Please note: Photos shown are for colour scheme purposes only, 67in Edge SFG are traditional flat style, not shaped fibreglass as depicted in schemes photos

Features:

• Strong yet light weight design, specially developed for precision acrobatic and extreme 3D flying
• Included optional flat SFG, easily installed with just two screws
• Included servo extension wires and wing bags
• Designed for both 20cc engine or electric motor
• Genuine German Oracover (Ultracote) covering and printed colour schemes
• Highly prefabricated, experienced builders can have air ready in under a day
• Internally mounted cowling - so no external screws exposed
• Removable wings
• Laser engraved motor mounting position

Please note: Instruction manuals are not supplied with Pilot-RC Kits. Generic manuals are downloadable from macgregor.co.uk or pilot-rc.com

Control horns mentioned within manuals are no longer supplied with Pilot-RC ARF Kits.

Description

The Edge 540 is well known for being one of the most aggressive full size aircraft ever made. Pilot-RC's version takes that into the model with massively powerful flying surfaces and fast responses. Contrary to most Edge's on the market, our version has been extensively tested to assure that it is still a smooth flying plane despite its crazy side!

This is the V3 of the Zivko Edge with slicker lines that make it look like its really travelling while still standing still, and with the included optional winglets make it really stand out from the crowd.

Included Hardware

• Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tube as well as fibreglass control horns and wheel pants)
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axles and wheel pants

Required Hardware (Not Supplied)

Motor: 20cc or equivalent electric (Please related products below for Power Packs)

Servos: 4 x MacGregor MG5921HV High Voltage Digital Servos and 4 x Pilot-RC 1.6in Aluminium Servo Arms

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Specifications:

Video

Optional Combo Power Pack Details:

PIL406 - Pilot-RC Power Pack for 67in Aerobatic Aircraft

Includes:

• 1 x Pilot-RC CC20/400KV Motor
• 1 x Hobbywing Platinum 100A ESC
• 1 x 18 x 10" Wooden Propeller

PIL408 - Pilot-RC Power Pack with Servos for 67in Aerobatic Aircraft

Includes:

• 1 x Pilot-RC CC20/400KV Motor
• 1 x Hobbywing Platinum 100A ESC
• 1 x 18 x 10" Wooden Propeller
• 4 x MacGregor MG5921HV High Voltage Digital Servos
• 4 x Pilot-RC 1.6in Aluminium Servo Arms

Build information

Cowl Size

A: 204mm – B: 184mm – C: 271mm – D: 185mm

Rudder Horns and Pull Pull Location

A: 17mm B: 82mm – C: 39mm – D: n/a – E: 8.5

Servo Extension Lengths

• Each aileron: 20cm (to reach receiver direct)
• Each elevator: 75cm
• Rudder: 10cm

Centre of Gravity

96mm Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.