Futaba T6K V3 Combo M2
Manufacturer:
Futaba
Special Order
Special Price
£224.99
£187.49
Regular Price
£280.00
SKU
P-CB6K3/L
Futaba T6K V3 - 8 Channel 2.4GHz T-FHSS (Dry) & R3008SB Combo (Mode 2)
| With the latest V3.0 software update the T6K is capable of operating up to 8 channels and now comes complete with the R3008SB receiver. What else is new in the V3S version? The T6K-V3S has an additional aileron mix for glider models without motor, acting on channels 1 and 3. For gliders, a total of 4 flight conditions can now be programmed. The trim mixer now also includes the rudder. Two independent stopwatches / timers are now available. The top right toggle switch is now a 3 position switch and in the Helicopter Menu, many governor functions can be adjusted directly from the transmitter. The Futaba T6K is the perfect entry/sport level radio for aircraft and helicopter pilots. This stylish, stealth looking transmitter features a clean in-built aerial, easy jog dial programming and a backlit LCD screen for ease of use, however the T6K is not only about style, it also includes many features you would normally expect in high-end transmitters. Designed to take full advantage of Futaba's popular T-FHSS telemetry system so a wide array of data can be monitored in flight (on screen or using the in-built speaker) including as standard receiver battery voltage and external battery voltage, whilst temperature, RPM, altitude and even a variometer sensors are available as options . The T6K is also capable of using S.Bus/S.Bus2 servos which can be easily programmed via the transmitter, whilst these and standard servos can all be used with the supplied R3008SB receiver. • S-FHSS/T-FHSS selectable • Telemetry system (T-FHSS) with data speech function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer • Built-in antenna • S.Bus/S.Bus2 servo setting functions programmable through the transmitter • Preset vibration alarms • 30 model memory • 8-character model/user naming • Programmable mixes for airplanes, helicopters, gliders and multi-rotors • Digital trims with variable step settings • Adjustable stick length and tension • Changeable switch/VR position and AUX channel function • Throttle position warning • Backlit 128x64 DOT LCD screen with adjustable display contrast • Software updateable through the CIU-2 • Screen Lock • Earphone/S.Bus/Trainer jacks • Assignable switches (three 3-position, one 2-position) • Range Check • Program navigation bay with jog dial, +/- pads and end pad • Data reset • Model copy • Selectable model type • Fail Safe • End Points • Trim/Trim Resets/Trim Steps • Sub Trim • Servo Reversing • Parameter functions • Servo monitor/Test • Wireless model data transfer • Timer-System and Model (Up/Down) • Trainer system Airplane Functions • Wing Type (5-wing, 2-tail) • Throttle Cut • Dual Rate/Expo • Throttle Curve • Idle down • Gyro • Aileron differential • V-Tail • Camber • Air Brake • Elevator-to-Flap mixing • Flap-to-Elevator mixing • Elevon mixing Glider Functions • Wing Type (5-Wing, 2-Tail) • Condition select • Dual Rate/Expo • Motor switch • Gyro • Aileron Differential • V-tail • Butterfly mixing • Trim mixing • Elevator-to-Camber mixing • Camber mixing • Aileron-to-Camber mixing Helicopter Functions • Swash type (6) • Condition Select • Throttle Cut • Dual Rate/Expo • Trim Offset • Delay • Gyro mixing • Swash AFR • Swash mixing • Throttle Curve (5-point) • Pitch Curve (5-point) • Pitch-to-Rudder mixing • Throttle Hold • Hovering throttle • Hovering pitch Multicopter Functions • Flight Mode • Center alarm • Dual Rate/Expo • Throttle Curve • Throttle Delay • Gyro Required for use: 4x 'AA' batteries for transmitter & suitable Rx battery |
|||||||||||||||||||||||
|
|||||||||||||||||||||||
| Barcode | 4513886034701 |
|---|---|
| Manufacturer | Futaba |
Write Your Own Review
