Laser-cut balsa and plywood parts
Wire undercarriage and wheels
Full-size build plan & sandpaper sheet
Push rods for elevator and rudder
Tissue for covering
Protective clear plastic sheet to protect the plan when building
Detailed step-by-step building manual and illustrated colour R/C conversion instructions
Hyper Cub waterslide decals

NEEDED TO COMPLETE

Electric motor (recommended Roxxy 22-16-25)
12A ESC
GWS-type, slow-fly 7 x 6" propeller
2 x 4.5g ultra nano servos (recommended HS-40)
2S LiPo battery - 350-400mAh (50 x 10 x 27mm)
Suitable covering material as alternative to tissue supplied (Oralight suggested)

DETAILS

Introduced in the 1980s, DPR's rubber-powered park flyer was re-engineered in 2017 and this is the new electric-powered version that provides the option to add three-channel radio control for rudder, elevator and throttle. The kit is packed with laser-cut parts that aid quick and painless assembly whilst the design suits beginners and even youngsters (with a little help along the way). In that respect, everything you need is there, including wheels, pre-shaped undercarriage wire and a pre-cut windscreen surround. Just add your own glues, tissue paste and dope to complete.

More Information