35cc FS Back Manifold Engine

ROTO 35 FS is single cylinder  4 stroke  gasoline engine made for RC model airplanes up to 3.5 m  and 12 kg. Engine 

• Crank case – it is rough-worked of the cast at the CNC milling cutter. After that it is covered or slashed with a special colour. 
• Cylinder – it is made of one piece of dural with pressed insole from the mild-granular cast iron, it is sharpened and honed to the correct size.  
• Piston – it is casted from silicon alloy with one sealing circle. The aparature for the bung 8 mm is honed.  
• Piston rod – it is forging, which is completely worked. Two needle focuses are moulded into piston rod, it is made for the piston and cranked bung.  
• Crank shaft – it is made of one piece of steel, it is cemented and hardened and it is completely sharpened. 
• Back lid of the engine – it is worked casting, in which is hardened and sharpened rolled slide - valve layed. 

Recomendet accesories 

• Muffler STANDARD FS

• Mounting

• Wooden Propeller